Edwards ECC-50/100: Voice Evacuation Command Center Specs & Wiring
Overview
The Edwards ECC-50/100 is a sophisticated voice evacuation command center designed for large buildings requiring comprehensive emergency communication systems. As a critical component of the Edwards emergency command center lineup, the ECC-50/100 integrates seamlessly with existing fire alarm systems to enhance safety through voice messaging. This panel is engineered to support both 50W and 100W audio outputs, making it versatile for a variety of applications. It is essential for technicians to understand the detailed specifications, wiring configurations, and protocols to ensure optimal performance and compliance with safety standards.Specifications
The ECC-50/100 voice evacuation panel is built to deliver robust performance and reliability. Below is a table of key specifications that technicians should be familiar with when installing or servicing this unit:| Parameter | ECC-50/100 |
|---|---|
| Power Supply | 120VAC, 60Hz, 3.2A |
| Audio Output | 50W or 100W |
| Battery Backup | 24VDC, 18AH |
| Temperature Range | 32°F to 120°F (0°C to 49°C) |
| Humidity | 85% RH Non-Condensing |
| Audio Distortion | Less than 10% |
Wiring Considerations
Proper wiring is crucial for the efficient operation of the ECC-50/100. The system supports both Class A and Class B wiring for speaker circuits, allowing flexibility in installation. When wiring the system, ensure that the speaker circuits are correctly terminated and that the wiring complies with the National Electrical Code (NEC) standards. Using appropriate gauge wire is essential to minimize voltage drop across long distances.
Pro Tip:
The ECC-50/100 also integrates with the Edwards Security Light Dock Base 101BS-E1, which can be used to enhance visibility in emergency situations by providing synchronized lighting with voice evacuation commands.
For installations requiring long wire runs, consider using 12 AWG wire to ensure minimal voltage drop and maintain audio clarity.
Protocols and Certifications
The ECC-50/100 is compatible with multiple protocols, including CLIP (Classic Loop Interface Protocol) and SLC (Signaling Line Circuit), which allow for seamless integration with other Edwards devices. Additionally, this panel is IDNET compatible, facilitating communication with Simplex systems. In terms of certifications, the ECC-50/100 meets UL 268 standards for smoke detection and FM approval for reliability. Compliance with these certifications ensures that the system performs effectively during emergencies and meets industry safety standards.Installation Tips
Successful installation of the ECC-50/100 requires careful planning and execution. Here are some expert tips to ensure a smooth setup process: 1. **Plan the Layout**: Prior to installation, map out the layout for speaker placement and control units to ensure comprehensive coverage and efficient wiring paths. 2. **Testing**: After installation, conduct thorough testing to verify that all components are functioning correctly. Pay special attention to audio clarity and system responsiveness.
Pro Tip:
For installations involving the Edwards 101BS-G1, ensure compatibility and proper connection with the ECC-50/100 panel to maximize system capabilities.
When testing the system, simulate different emergency scenarios to ensure that all zones receive clear and timely messages.
FAQs
The ECC-50/100 can output up to 100W of audio power, depending on the configuration.
Yes, the ECC-50/100 is compatible with systems using CLIP, SLC, and IDNET protocols.
The system requires a 120VAC, 60Hz power supply and includes a 24VDC battery backup.
No, the ECC-50/100 is designed for indoor use within specified temperature and humidity ranges.
Find These Parts on FirePartsHub
Browse our verified inventory of Edwards components sourced from trusted eBay sellers: